搜索关键词"研华产品怎么样好不好",共个3652结果

研华SQR-SD4I 工业级 SODIMM DDR4 2133/2400/2666

工规级30u” 金手指厚度 工作温度,支持宽温:-40°C~85°C 原厂原装DRAM芯片 Fixed BOM,终身保固 带热传感器 老化测试,100%筛选测试*260 针双列直插内存模块 *频率:2133/2400/2666 *容量:2GB/4GB/8GB/16GB *电压:1.2V *JEDEC 合规 *工作温度:-40 °C ≤ TCASE ≤ 85 °C...

研华SQR-UD4(ECC) 288 pin UDIMM DDR4 2133/2400/2666

固定 BOM / 固定 die 30u”金手指 一级原装芯片 100% 测试 带温度传感器的 EEPROM 老化测试研华工业级SQR,288pin UDIMM ,频率:2133/2400/2666MHz,容量:4GB/8GB/16GB,电压:1.2V ,JEDEC 标准...

研华RS-422/485隔离中继器ADAM-4510

RS-232/422/485自动数据流控制 3000伏直流电隔离保护 RS-485数据线浪涌保护 传输速度可达115.2Kbps 网络覆盖面积达1200米(4000英尺) 预留有终端电阻空间 电源和数据流指示灯,提醒故障处理 电源要求:+10到+30伏直流电 DIN导轨、面板或搭载安装上,方便简单 大多数工业计算机系统都带有标准的RS-232的端口。虽然RS-232得到了普遍的使用,但它的传输速率、传输距离及网络容量还是有一定的限制。RS-422和RS...

研华USB转串口转换器BB-USPTL4-LS

USB到RS-422/485转换器 USB端口供电 高稳固力USB连接器,插入式串行接线端子 460.8 kbps串行数据传输速率 包括USB线缆 锁定串口端口号-简化工作流程...

研华USB转串口转换器BB-USOPTL4-2P

USB至RS-422/485转换器 2 kV隔离 921.6 Kbps串行数据传输速率 面板安装 10-30 VDC电源输入的接线端子 高稳固力USB连接器,插入式串行接线端子 包括USB线缆...

研华工控机故障的解决方法

` 研华工控机故障的解决方法 一、 打开计算机电源而计算机没有反应: 1 、 查看 电源插座是否有电并与计算机正常连接; 、检查计算机电源是否能正常工作(开 机后电源风扇是否转动) ,显示器是否 2 与主机连接正常; 、打开机箱盖查看电 源是否与计算机底板或主板连接正常,底板与主板接插处 3 是否松动,开机 电 源是否接线有误;底板或主板是否上电, ATX 、拔掉存条开机是否报警; 4 或 主板。 5 、更换 CPU? 二、 加电后底板上的电源指示灯, 亮...

研华UTC-215G 15.6" Open-Frame Computer with Intel Pentium N4200

Available for embedded into kiosk chassis and wall mount type One-piece and fan-less design Rich screen size and core from UTC series Rich IO for extensional peripherals connection Built-in Intel® Pentium® N4200...

研华UTK-6024 23.8" Light and Multi-Purpose Self-Service Kiosk

Indoor self-service kiosk equipped with a 23.8" touchscreen Colorful eye-catching LED indicators ensure intuitive operation Multiple stands with RFID bin and tray for easy installation Compact and lightweight for convenient instal...

研华UTC-100P-B 2D Barcode module for UTC-100 Series

Sensor: CMOS sensor with 640 x 480 pixel resolution Illumination & Aiming: White LED illumination; Red LED dot aimer Typical Frame Rate: 30 frames per second Motion Tolerance: Up to 100 cm/s (4 in/s) for 13 mil UPC at optimal ...

研华UTC-100P-S Smart Card Reader for UTC-100 series

International Standard: Comply with PC/SC 1.0 standard and EMV L1 CPU Card: Comply with ISO7816-1,2,3,T=1 and T=0 protocol Memory Card: Synchronous 2-line, 3-line and I2C interface Card Acceptor/ Reliability: Friction Type (ID-1)...

研华UTC-100P-F Finger Print Module for UTC-100 Series

Image resolution: 508DPI Gray scale: 8-bit Array size: 256 x 360 pixels Imaging area: 18.00mm x 12.80mm Dimensions: 101.0 x 34.9 x 9.4 mm OS Support: Windows 10 & Android Operating Temperatures: 0 ~ 40 °C Interface: USB...

研华UTC-300P-M Magnetic Stripe Reader for UTC-300 Series

USB connection to UTC Card Standard: ANSI/ISO Standards 7810,7811-1~6, 7813 Head life: 1,000,000 times(ISO test standard) Color: Black/ WhiteMagnetic Stripe Reader for UTC-300 Series...