Max. 5 MHz, 8-axis pulse output Encoder input is 10 MHz for 4xAB mode, 2.5 MHz for CW/CCW mode BoardID is switchable Easily visible LED indicators on board to do diagnosis Direct wire to servo drive to save terminal board space wh...
User-friendly Group ID technology. Quick and accurate setup. Cable redundancy for enhanced connectivity. Ensures reliable and stable communication with connected devices. High-density design. Supports up to 256 AMAX-5000 Slice I/O...
4-channel 32-bit encoder counters Encoder input mode : CW/CCW , Pulse/Direction, A/B Phase Encoder input signal : A, B, Z Encoder input frequency : 5 MHz (Maximum) 4-channel trigger DO for position compare Trigger output frequency...
Suitable for EtherCAT networks 32-ch digital output with 2,500 VDC isolation Wide output voltage range (5 ~ 40 VDC) and high output current (350 mA/ch) Quick removable European type connector LED indicators for I/O status Supports...
Suitable for EtherCAT networks 32-ch digital input with 2,500 VDC isolation Wide input voltage range (10 ~ 30 VDC) Quick removable European type connector LED indicators for I/O status Supports EtherCAT Distributed Clock (DC) mode...
Suitable for EtherCAT networks 16-ch Isolated Digital Input and 16-ch Form A-type Relay Output High-voltage isolation on input channel (2,500 VDC) Quick removable European type connector LED indicators for I/O status Supports Ethe...
输入通道个数 : 6 (Differential) 输入/输出类型 : V,mV 电压输入范围 : ±150 mV, ±500 mV, ±1V, ±5 V, ±10 V 输入阻抗 : >10M Ω 看门狗定时器 : System (1.6 seconds) 输入采样率 : 100 sample/s(per channel)6路电压输入模块，16位（插片式）...
可设定模块ID 板载LED指示灯方便调试诊断 无需额外端子板即可直接与伺服电机驱动器连线 最高6.5MHz ，4轴脉冲输出 28位计数器用于增量编码器输入 对应步进或伺服电机驱动器水平安装 适合DIN导轨安装 可设定限位开关电平逻辑(高/低) AMAX-1240的紧凑型基板式设计使其可以水平安装，板载有连接端口。通过一根信号传输线，这款模块能方便地与三菱J3系列、安川 ∑V系列和松下A4/A5系列伺服驱动器相连。AMAX...
可设定限位开关电平逻辑(高/低) 可设定模块ID 板载LED指示灯方便调试诊断 无需额外端子板即可直接与伺服电机驱动器连线 最高6.5MHz ，4轴脉冲输出 28位计数器用于增量编码器输入 对应步进或伺服电机驱动器水平安装 适合DIN导轨安装 AMAX-1220的紧凑型基板式设计使其可以水平安装，板载有连接端口。通过一根信号传输线，这款模块能方便地与三菱J3系列、安川 ∑V系列和松下A4/A5系列伺服驱动器相连。AMAX...
编码器类型：SSI（二进制/格雷码） 锁存计数器值 比较器 *2 比较触发输出 *21路 SSI 绝对值编码器模块（插片式）...
输入通道个数: 6 differential 输入/输出类型: (T/C: J, K, T, E, R, S, B, mV, 断线检测) 输入阻抗: >2MΩ 电压输入范围: ±50 mV, ±100 mV, ±500 mV, ±1 V, ±2.5 V 直接传感器输入: Type J (-210 ~ 1200° C), Type K (-270 ~ 1372° C), Type T (-270 ~ 400° C), Type E (-270 ~ 10...
输出通道个数: 8 (源型) 输入/输出额定电压: 10~30VDC 输出额定电流: 当逻辑1，0.5A每通道 漏电流: 当逻辑“0”,10µA每 通道 输出延迟: 逻辑0到1:150µs 逻辑1到0:2ms8路数字量输出模块，0.5A 源型（插片式）...